Click here to return to
recommended
instrumentation
page

VIDEOTAPED
THERAPEUTICS
SEMINAR by Dr.
Walter D. Sturm of
OIRF Staff:
Click here for more
information.

---

---

Related Publications
"Remedy Information
Transfer Unit"
Instructions

If you wish to obtain a
copy of our 20 page
instruction manual for
it before making a
purchase decision,
ask for "R.I.T.U."
Instructions. Also
contains valuable
information applicable
to MORA owners.

---

This model discontinued.  See additional description at RITU with inverted A

Hundreds of these handy, money-saving devices are already in daily clinical use, worldwide. Praise from affiliates and others using them is overwhelming. Scores of further application ideas for it have been found, even with "allopathic" medications. Most owners just cannot believe how we are understating and downplaying the many advantages of this remedy information transfer unit in written literature for it. But, that is our policy. We wanted to let you know that these valuable units are currently still available. Telephone before ordering for current prices (based on EURO to CDN Dollar exchange rate)!

Photo shows "Remedy Information Transfer Unit" with optional honeycomb substitution for
 one of the cup/bottle electrodes, instead of two cup/bottle electrodes in standard package. 
[Honeycomb contents and bottle as shown for  illustration purposes are not included.]

THE PROBLEM:

You have just tested-out a small sample of some imported remedy on your patient and found it to be effective and tolerable. However, you discover you are out of any treatment quantity of that homeopathic preparation, and the supply you had ordered months ago from overseas has still not arrived. Ideally, your patient should have that particular remedy right away, but you do not want to use up your only test-set sample. You are already behind schedule and cannot now take more time to look for any possible substitute, nor will you be able to see the patient again until three weeks later. This is a common problem. What do you do in situations like that? Probably, that is when you really wish you had a MORA unit. For in just minutes, you could at least give your patient full benefit of the exact remedy information that the patient responded to in med-testing that sample, yet still keep the test-set sample afterward.

THE REAL SOLUTION:

One of three major MORA-Therapy unit possibilities for transferring therapy information, either directly to a patient (for example through a hand electrode) or indirectly into a neutral substance for immediate or future administration, is called the "A" circuit. "A" stands for "All", because the circuit electronically transfers the full frequency spectrum of the input information (such as that from the remedy sample), amplified but completely unmodified, into whatever is connected at the output (patient, neutral substance in a bottle, etc.). Because it does this electronically [rather than with magnets, coils or radionics] the input sample is never ruined or changed. Due to amplification of incoming information, imprinted substances are able to retain their potency for many years, and transfer does not deplete nor in any way diminish sample strength. After the transfer process is finished you can put the sample back into your test-set with utmost confidence in its integrity for any subsequent test or transfer use. Alas, who can afford a MORA unit just for remedy information transfer? Our answer is, now you can!

OUR LESS EXPENSIVE ANSWER:

There is a unique external 'supplementary amplifier' for MORA Therapy units, simply consisting of that "A" circuit with an 'On/Off' switch and intensity control. It is primarily used to boost output power for certain solid substances (non-homeopathic). Since it was seldom needed, some European doctors started using it separately for remedy information transfer purposes if their MORA unit was tied up with another patient. They found that it works like a charm for "duplicating" homeopathic remedies. So they began to use it just like their MORA unit to combine information from all single or combination remedies tested on the patient into one take home bottle (e.g., alcohol/water mix) as a temporary measure, until the patient's local pharmacy could obtain the remedies. Others used that MORA amplifier independently to create customized potency accords or test combinations not otherwise available, from their test-set ampules of homeopathic single remedies, rather than actually mixing the genuine preparations. But that is about as far as it went there, since the actual remedies are readily available.

Unfortunately it was "for MORA owners only" and unavailable to those who really needed one due to remedy importation problems. But, we convinced the German MED-TRONIK factory to sell us large quantities of these supplementary amplifiers, on the basis that they may help get our affiliates interested in the other big advantages of a full-scale MORA-Therapy unit -- and that it certainly has done. By adding cables and actual MORA unit cup/bottle electrodes to it, we have come up with a standard package plus several extra electrode options (hand, point, and honeycomb ampule holder). That is our answer to a common problem in this field, and it has actually turned out to be the answer to many other medication testing problems as well. We call it the "Remedy Information Transfer Unit", for lack of a better name.

A SHORT DESCRIPTION:

The supplementary MORA amplifier is a gray metal case about 4 inches wide, 3 inches deep and 2 inches high, weighing close to eight ounces with internal 9 volt battery (included). It is battery operated to avoid all electrical power interference. On the top surface there is an On/Off switch, a light to indicate when the unit is operating or the battery is low, and a twelve level amplification intensity control knob. Two ends have projecting female BNC cable connectors to input and output electrodes. Inside the case, solid-state electronic circuitry [no specs available]. That's it. Factory provides one year warranty (excluding battery and damage). The cup/bottle electrodes can hold from one to twenty loose ampules, all sizes of vials, or small bottles right up to regular 4oz. rounds.

NEW! The very latest models of this amplifier have a provision at the first two intensity levels for amplitude diminishment by a 0.1 and 0.01 intensity factor. That means one can now decrease output intensity (down to 10% or 1%) as well as greatly increase (amplify) output. This makes it even more useful for medication testing, transfer from large volumes into very small volumes such as in producing test sample vials, and invaluable for "desensitization" in allergy work.

THE STANDARD PACKAGE:

• One "Remedy Information Transfer Unit" (supplemental MORA amplifier)
• Two high quality MED-TRONIK cup electrodes (also called bottle electrodes) of clear Plexiglas with cleanable brass base contact plate and dual female BNC connectors [extra one for optional electrodes!]
• One 20 inch shielded BNC cable
• One 38 inch shielded BNC cable
• English operating instructions.
  
  
  

THE SUBSTITUTE PACKAGE :

• Replaces one of the two cup electrodes with one small honeycomb (as pictured above).
  
  
  

ELECTRODE OPTIONS:

(A) Hand electrode for direct transfer to patient, easy to clean gold finish with female BNC connector.

(B) Point electrode for transfer into selected acupuncture points, chrome finished body with female BNC connector and special rounded brass therapy tip.

(C) Honeycomb-style ampule holder to secure valuable test-set input samples (rather than place loose in cup electrode), clear Plexiglas with cleanable brass base contact plate, female BNC connector, holds seven regular and four larger ampules [this honeycomb is used to substitute for one of the two cup/bottle electrodes in the substitute package].

Note: Cables provided with the standard package have male BNC connectors at both ends.

A BRIEF EXPLANATION ABOUT THIS DEVICE, FOR THOSE WHO MED-TEST:

First of all, understand that with the electronic medication testing phenomenon you are testing information contained in the remedy samples, since one does not actually administer each sample to a patient in order to then measure its effect on the body. If a remedy responds well for a patient, it is the inherent information in the remedy sample that affected the patient favorably, as indicated by your electro-acupuncture test instrument [or muscle testing procedure]. Obviously whatever is emanating from the remedy sample can be conducted through a wire (like connection wire from test sample holder to test instrument). We simply refer to the frequencies -- or whatever is involved here -- as "information".

Similarly, when you use this unit to amplify and transfer a remedy to patient or bottled liquid, you are transferring the precise remedy information that the patient responded to in med-testing it (provided transfer is done using the same sample that was tested). Because the input of the transfer unit gets its information in the same manner as information from a remedy is conducted to your test instrument (namely through a wire from whatever holds the remedy), it has the exact same information to work with, and therefore that is exactly the information it will give back at the unit's output. Furthermore, when connected between the honeycomb (input) and test instrument (at output) it makes medication testing much easier for beginners due to amplification ability, and since it does not allow backflow this device also prevents pathological patient information from contaminating valuable test ampoules in the honeycomb.

NOTE WHAT THIS "REMEDY INFORMATION TRANSFER UNIT" WILL NOT DO

• It can not create a higher or lower potency from the input sample, because its only function is to precisely transfer the full information of whatever is at the input (and amplify that at selected intensity). [Amplification selection allows for patient dosage adjustment, and transfer into large volumes of output medium from even a small volume of test samples at input.] 
  
  
• Nor is this supplementary amplifier able to filter or separate the 'Harmonious' and 'Disharmonious' aspects from total input spectrum, which is the primary MORA concept and which is the third major therapy circuit in a full MORA unit (known as the "H + inverted D circuit" or 'bio-filter').
  

HOW TO LEARN MORE ABOUT THE “Remedy Information Transfer Unit”