The Biological Medicine Resource

Your Information and Technology Bridge linking
German Biological Medicine with
English speaking practitioners worldwide - since 1972!

MED-TRONIK^®

Click here to see
more information on
RM-10/S

Click here to see
more information on
MORA III

RITU-Interface &
Electronic-Homeopathy 

Dedicated Digital-Analog Converter with Integrated
Remedy Information Transfer (Amplifier) Unit

for the Application of Med-Tronik's proprietary
ELectronic Homeopathy (ELH) software programs

in combination with Med-Tronik's EAV diagnostic
and MORA-Therapy instruments
 

                                       
                           RM-10/S                                                                       MORA III/RM200
 

RITU – Interface (Digital-Analog Converter)

• Amplifier with variable settings from 0.01 (attenuation) to 1000 (amplification)
   

• Selectable signal switching between A or Ā (Inverted) modes
   

• The signals from the Interface and Amplifier can be output separately
   

• Amplifier can be used separately (e.g. in combination with a honeycomb or
  input cup electrode for ampules)
   

• Amplifier is internally connected to the Interface (DAC)
   

• Unit design and dimensions similar to the RM-10/S
   

Combines the advantages of these tried and tested
Med-Tronik components
 

But what does it do?

Med-Tronik is again stretching the boundaries of the biological medicine field with the introduction of their RITU-Interface. We have spent considerable time working with this latest innovation from Med-Tronik, and the preceding two pages are an adaptation of their factory information sheets. Let me tell you more . . .

This unit combines three existing Med-Tronik components:

1. Remedy Information Transfer Unit (or RITU)
    

2. ELH Interface (or Digital-Analog Converter)
    

3. So you can access the high quality remedies stored in
   Electronic Homeopathy (or ELH)
    

You are already familiar with the RITU for work with transfer of remedies, and on newer models the ability to invert incoming remedy information for allergy work.

The ELH Interface has been an integrated accessory of the MORA-Super, Century and MORA-Combi units for many years. It is this Digital-Analog Converter (DAC) that allows your MORA device to communicate with the computer and then to “read” the pure electronically stored remedies of the Electronic Homeopathy software programs.

This amazing combination opens the door for many new applications. Information on both of these devices and Electronic Homeopathy has been previously sent to you, or can be found on our website.
 

 What are the advantages of this RITU-Interface?

• Very cost effective, as it works with existing instrumentation
   

• Allows you access to the thousands of pure digitally recorded and stored remedies of the Electronic Homeopathy software programs
   

• Through shielded connections the Interface transfers the remedy information into a pure analog signal that has no electronic or environmental interference
   

• You can test and then deliver all remedies in the ELH software programs
   

• But, most importantly, this unit will work with virtually any diagnostic device. You do not have to purchase new diagnostic equipment to be able to access the finest electronic homeopathy software available anywhere!

• Of course Med-Tronik designed this unit to work with their own analog diagnostic units. However, provided your diagnostic unit meets the German standards of the industry for point and medication testing, with the appropriate adapters (to convert banana cables to BNC and so on) there are no difficulties in utilizing this unit. To date we have managed to test and confirm application with all of the following units: RM-10/S, MORA III/RM200, Photon Resonance Test and VEGA.

What are some of the disadvantages of this RITU-Interface?
 

• Let’s face it for this very low price, you can enter the realm of Electronic Homeopathy, but it is not going to be as slick and easy to use as the bigger, much more expensive MORA-Super and Century models that were designed for this application. But to save literally thousands of dollars, you will have to put up with some extra cables and be prepared to manually enter test information onto the computer or into your records.
   

• Because the test device itself (RM-10/S, MORA III, PRT or VEGA) is not physically linked to the computer, you cannot easily utilize the WINBASE EAP (EAV/EDS) diagnostic program – in other words, you will have to manually enter your readings onto the computer for it to analyze and print out.

Other than that, we have found no drawbacks or difficulties with this unit.
It does the job very nicely and – best of all – the price is right!
 

Here is a picture of the unit hooked up to an older VEGAMIDITEST 702.
This shows the serial port connection to the computer with a parallel dongle.
USB connections are also available for use with laptops or notebooks.

What is included with the RITU-Interface unit itself?

• WINBASE Data Software

• Serial Cable to connect to computer

• ½ meter shielded BNC cable to connect to Diagnostic unit

• “F” BNC adapter to allow use of external honeycomb

Optional Accessories:

• Serial to USB adapter

• Red female Banana to male BNC adapter

• Extra ½ meter and 1 meter shielded BNC cables

Package #1 Includes:

• RITU-Interface (with WINBASE Data Software)

• RM-10/S

• Electronic Homeopathy (ELH)

 Package #2 Includes:

• RITU-Interface (with WINBASE Data Software)

• MORA III/RM200

• Electronic Homeopathy (ELH)

Package #3 Includes:

• RITU-Interface (with WINBASE Data Software)

• Electronic Homeopathy (ELH)
   

Package #1: RITU-Interface with RM-10/s and ELH, Parallel Dongle, Serial Connection.