Made in Germany by the renowned Med-Tronik firm (known for products like MORA-Therapy). Easy to use Complete micro-chip control Automatic function check of electrodes and complete unit ICS – Integrated Check System Automatic calibration of the electrode Analysis of results with the new BEV-WIN Windows software

About the new BE-T-A unit

• The MT732 is a fully microprocessor controlled system, using the very latest MTR IV “Combo” measurement electrode.
  
• Manual or automatic temperature compensation.
  
• LED display shows measurements, temperature and functional messages.
  
• Completely new software in English for PC Windows 3.1 or higher; sound card needed for “Tutor” program; supports color printers; patient data storage limited only by hard drive capacity; network operation possible, in multiple languages.
  
• Clinically tested software can remotely operate the BE-T-A unit if desired, with automatic data feedback to the computer for immediate analysis.
  
• After analysis, software also provides specific therapy suggestions based on a thirty year treasure-trove of experience.

Best of all, it’s not a knockoff, but rather the original according to Prof. Vincent.

BIO-ELECTRONIC TERRAIN ANALYSIS (BE-T-A)…

This unique analytical method, originally developed by Professor Vincent, works both physically and biochemical, which means that the so-called biological terrain of illnesses and also of substances can be identified and described. It is an essential element in the early recognition of illnesses.

Three specific measures register the biological terrain by determining the pH, rH2, and r-values of the three main body fluids: blood, saliva and urine.

A precise method for accurate diagnoses.

The three main readings, and the relationships between them, enable the patient’s illness risks to be calculated exactly and the appropriate preventive measures to be taken.

The BE-T-A allows many illnesses to be easily identified and thus their progression may be limited already at an early stage. The medical analysis software BEV-VIN provides the exact interpretation of the readings.

BE-T-Analysis makes early recognition of the following possible (for example):

• Unbalanced acid-base metabolism
• Bacterial and viral infections
• Chronic intoxication
• Malign events
• Mineral deficiency
• Mycosis stress in the intestinal tract
• Acute liver, gall bladder and pancreas malfunctions
• Chronic prostatitis
• Thrombophilia
• Anemia and polyglobules
• Diabetes
• Mesenchymal alkalosis and acidosis
  (Above examples taken from 33 differential diagnoses)

The BE-T-A is suitable for a wide range of uses:

The BE-T-A is particularly suitable for the following areas of application:

• Checking the health of risk-groups, e.g. managers, competition athletes, industrial workers, occupations subject to a permanently toxic environment
• Checking the course of illnesses
• Analyzing oxidative stress
• Diagnosing intestinal mycosis
• Extended diagnosis of all metabolic illnesses
• Recognizing a creeping kidney insufficiency with chronic auto-intoxication
• Prophylactic health checks on elderly people, children, pregnancy, etc.
• Reliable protection – from infancy onwards: Prophylactic health care is a field in which the BE-T-A has proven its worth. Used continually, it gives early indications of metabolic ailments as soon as they start to occur.

Intelligent technology opens up new dimensions in application:

The MT 732 is the first instrument of its kind with microchip controlled menu functions, and thus the therapist is provided with completely new dimensions in application.

Calibrating the electrodes used to be a laborious and time-consuming procedure. The MT 732 now calibrates itself automatically, in seconds, and with the greatest precision.

The standardized integrated RS232 interface allows the rapid transmission of the measured data into a modern Windows analysis software (BEV-VIN), which stores the data directly into the patient’s database.

Integrated functions make it easy to use:

A function for subsequent examinations now makes it possible to take the readings from a number of patients simultaneously.

The modern foil-covered keypad makes the instrument easy to clean, and thus meets even the most stringent requirements for hygiene and ease of use.

Its handy dimensions and low weight means that the MT 732 can be taken anywhere and also be used on site at the patients. Integrated memory modules store the readings, which can be transmitted to the BE-T-A analysis software BEV-VIN at a later point in time or when the doctor has returned to his practice.

Precision engineering at its best: the BE-T-A measurement electrode assembly is no bigger than a ten cent coin but it incorporates six highly sophisticated electrodes – a miracle of precision engineering.

Guaranteed quality determines the high-precision readings:

The heart of the MT 732 is the MTR IV measurement electrode. It meets all the requirements for a reliable and precise electrode. For instance, 2 ml of fluid is sufficient to allow a faultless rH2 measurement to be carried out.

A diaphragm specially developed for the BE-T-A MTR IV measurement electrode prevents it becoming clogged by high-protein fluids that used to happen so frequently.

The highly sensitive temperature sensor, integrated between the pH, rH2 and r electrodes, automatically registers the current temperature of the fluid with every reading.

The electrode can be cleaned easily but thoroughly after each measurement, which eventually ensures reliable and precise readings.

Highly sensitive electrode materials and the extremely precise workmanship that goes into it ensure swift response speeds and long-term stability in the electrodes. A long service life and the simple regeneration of the measurement electrodes offer you a high degree of reliability and ease of servicing.

Highly sensitive high-tech electrodes make quick, reliable measurements possible.

Innovative technology at a glance:

The important features of the MT 732:

• Automatic calibration and function check of the electrode assembly
• Fully controlled by micro-chips
• ICS Integrated Check System
• Programmable RS232 interface for high-speed information transfer and exchange
• Automatic temperature compensation
• PC controlled menu function (optional)

System requirements for BEV-VIN software:

• Operating system: WindowsXP or Windows7
• Mouse: Supported by Windows
• Printer: Supported by Windows
• Graphics Card: VGA color card, 256 colors min
• Processor: 486/50 MHz or higher
• Free HD memory: 10 MB min.
• RAM] 8 MB min.
• Sound card: optional for TUTOR program

BEV-WIN software for reliable analyses:

The difficulty in BE-T-A or BEV diagnoses used to be that the nine readings had to be interpreted before their diagnostic significance could be understood, and particularly before their causal relationships to one another could be identified.

A new differential diagnosis program, which is an integral part of the BEV-VIN, will give you the basis for almost any diagnosis and will also tell you which of the readings is responsible for it.

Rapid access to all relevant data

Cross-connections with other readings, interpretation aids and in particular therapy guidelines (e.g. which medication would be helpful in treatment) also give valuable indications for diagnosis and therapy.

A comprehensive, illustrated tutorial program will also give you the reassurance that you are measuring, using and cleaning the electrode in exactly the right way.

Top of Page | Instrumentation |What Is BE-T-A | 30 Years of BE-T-A | BE-T-A Info for Patients